YLBZ系列液压轮边制动器 YLBZ SERIES HYDRAULIC WHEEL BRAKES

应用Application

·YLBZ系列液压轮边制动器，主要作为港口、码头、等露天使用的大型起重机及港口装卸机械工作状态下的防风制动和非工作状态下的辅助防风制动。

APPLICATION

·YLBZ series hydraulic wheel brake is mainly used for wind proof braking under working conditions and auxiliary windproof braking under non working conditions of large cranes and port handling machinery used in open air such as ports, wharfs and so on.

主要特点 Main Feature

·碟簧液压缸性能优良，严格按照GB/T15622-2005设计、生产、制造。

·常闭式设计，液压站驱动施力于碟形弹簧而释放，安全可靠。

·制动块动作采用连杆结构，确保制动器松闸时摩擦片平面各处与轮端面间隙均等。消除以往松闸状态摩擦片附贴制动轮的现象。

·防腐型设计，全部紧固件和销轴为不锈钢制造，防腐性好。

MAIN FEATURE

.Disc spring hydraulic cylinder has excellent performance and is designed, produced and manufactured instrict accordance with GB/T15622-2005.

·Normally closed design，the hydraulic station drives the disc spring to release,which is safe and reliable.

·The action of the brake pad adopts the connecting rod structure to ensure that the clearance between the friction plate plane and the wheel end face is equal when the brake is released.Eliminate the phenomenon that the friction plate is attached to the brake wheel in the previous brake release state.

·Anti-corrosion design.All fasteners and spindles are made of stainless steel, with good anti-corrosion performance.

使用条件 Operating Condition 

.环境温度:-20℃~+50℃

.工作压力:8Mpa

.电源电压:3相、交流380V、50Hz

.户外雨雪侵蚀或有腐蚀性气体和介质应采用防腐型产品。

.有特殊要求时，在订货时协商确定。

OPERATING CONDITION

.Ambient temperature: -20℃~+50℃

.Working pressure: 8Mpa

.Voltages: AC 3 phase 380V 50Hz

.Outdoor rain and snow erosion or corrosive gases and media shall be anti-corrosion products.

.Special requirements can be discussed before production.

·例:如额定夹紧力为50KN，轮宽160，左式装配，其订货标记为YLBZ25-160-左；右式装配为YLBZ25-160-右。

.For example: if the rated clamping force is 50KN and the wheel width is 160,the order mark is YLBZ25-160-left；The right type assembly is YLBZ25-160-right.

YLBZ系列液压轮边制动器技术参数及安装尺寸 TECHNICAL DATA AND DIMENSIONS OF YLBZ SERIES HYDRAJLIC WHEEL BRAKES

·注:当轮宽尺寸B不在表中范围值内时，可与我们技术部门取得联系。

Note: Please contact our technical department，when wheel width Bisn't within the range specified in above table.

·具体型号，结构及外形尺寸保留更改的权利。

The size of the specific type and structure should be retained.