TYWZ2系列脚踏液压鼓式制动器  TYWZ2 SERIES FOOT OPERATED HYDRAULIC DRUM BRAKES

应用 Application

·TYWZ2系列脚踏液压鼓式制动器，主要用于起重、运输、冶金、矿山、港口、码头、建筑机械等中、小型起重机大车运行机构的平稳减速制动，是一种常开式制动器，为操作人员提供了一种平稳放慢和减速制动的方法。

APPLICATION

·TYWZ2 series pedal hydraulic drum brake is mainly used for the smooth deceleration braking of smalland medium cranes,such as liting,transportation，metallurgy，mining，port,wharf, constructionmachinery, etc. it is a kind of normally open brake，which provides a smooth deceleration and deceleration braking method for operators

符合标准 Standards Compliant

·TYWZ2系列脚踏液压制动器的安装尺寸符合DIN15435和JB/ZQ4388-2006标准。技术要求符合JB/T6406-2006标准。

STANDARDS COMPLIANT

·The installation dimensions of TYWZ2 series foot hydraulic brake conform to din15435 and JB/zQ4388-2006 standards. The technical requirements conform to JB/T6406-2006 standard.

主要特点 Main Feature

·制动衬垫为卡装式整体成型结构，更换十分方便、快捷。

·联锁式退距均等装置和瓦块自动随位装置，使用过程中始终保持两侧瓦块退距均等，避免因退距不均使一侧制动衬垫浮贴制动轮的现象。

·主要摆动铰点均设有自润滑轴承，传动效率高，寿命长，使用中无需润滑。

·带有手动闭合(上闸)装置，在非工作状态下有需要时，可通过其进行维持制动。

MAIN FEATURE

·Brake lining is of clamped integral forming structure, which is easy and quick to replace.

·Interlocking shoe clearance balancing device (patented technology)and shoe auto-aligning deviceconstantly equalize the clearance of brake shoes on both sides and make adjustment unnecessary,completely avoiding brake lining one side sticking to brake wheel.

·Main hinge points are equipped with self-lubricating bearing,making high efficiency of transmission,long ser vice life.Lubricating is unnecessary during operation.

·With manual closing (Upper Gate) device，it can be maintained and maintained in case of nonworking condition.

使用条件 Operating Condition

·环境温度:-20℃~+50℃

·制动器周围环境中，不得有易燃、易爆及足以腐蚀金属和破坏绝缘的气体和导电尘埃的场合。

·相对湿度:空气相对湿度不大于90%

·使用地点的海拔高度符合GB755-2019

·户外雨雪侵蚀或有腐蚀性气体和介质应采用防腐型产品。

·有特殊要求时，在订货时协商确定。

OPERATING CONDITION

·Ambient temperature:-20℃~+50℃

·There shall be no inflammable，explosive gas and conductive dust that can corrodemetal and destroy insulation in the environment around the brake.

·Relative humidity: the relative humidity of the air is not more than 90%

·The altitude of the place of use conforms to GB755-2019

·Rain and snow erosion or corrosive gases and media should be corrosion resistant.

·Special requirements can be discussed before production.